Generally available in auto parts stores, use anti-foulers with care.
Go easy when removing the vacuum valve in the emission control system or else.
The most chronic area on a BMW engine is the valve cover. Even after installing a new valve cover gasket, it’s only a matter of days before it starts to seep and you where it goes next. Well I’ve solved the problem easily and inexpensively.
The second of two “how-to” articles on turning your BMW 2002 into a BMW 2602 by Pete McHenry from the November 1987 BMWCCA Roundel.
Part 1- 2002 SIX Cylinder ENGINE CONVERSION How To…When six gozinta four, good things happen to your Bimmerby Pete McHenry from November 1987 BMWCCA Roundel.
A number of BMW 2002 and 320i’s were found to be leaking oil from the distributor flange.
Boost the horsepower in your BMW 2002.
I recently had a timing chain replaced on my 1968 BMW 2002 and saved $100 on the job because my mechanic used a timing chain with a master link instead of the timing chain that comes from BMW without a master link.The chains are made by the same company with the same strength and endurance.
1969 BMW 2002 RPM setting.
Changing the ignition timing without a timing light?
Do you have full throttle? With a small adjustment you can.
Quick and easy carburetor synchronization.
Did the engineers from Munich screw up when they designed the inlet manifold system on the 1976 BMW 2002?
And, two other questions come to mind…
Power is down, white smoke and fuel economy dropped to 20 mpg. So what’s the answer?
Carboned plugs, the hidden mystery.
Here’s a bit of advice for air injection BMW 2002 owners.If your emission control is broken etc. you can improve your exhaust flow by removing the injector tubes in your stock manifold. You can also install
Nearly everyone knows by now that in order to make an engine run efficiently, you must get the fire started before the piston reaches top dead center (TDC). And the faster the engine is turning, the sooner the fire needs to be started, because
If your engine mount has deteriorated and needs to be replaced. Use the new
Here are some things to really consider doing when changing a head gasket.
Improvement your performance by simply regrinding the intake manifold ports. Read how.
Having just finished my latest BMW 2002 engine re-build, I’d like to share a few ideas and tips to make the job easier for others.
7 Great tips to keep that 6 purring.
Swapping screws could stop distribution.
An independent circuit can make your engine run about 15 degrees cooler.
For the love of classic BMW 2002s everywhere. Copyright 2012 02Restoration.com. All rights reserved.
Email
RSS